☁️ Puff Effect

🔥 Hot Peel Release Paper

🧺 Outstanding Durability 

Features

• Creates a raised puffy 3D effect on t-shirts, fleeces, sweatpants, polos and much more
• Screen printed product
• Matte finish prints. (Black ink is a little more shiny than any other ink colours)
• Hot peel release transfer for faster production
• Made to last as a traditional screen printing, put it in the washer and dryer!

Recommended Fabrics

• Cotton
• Cotton/Polyester
• Polyester
• Tri-Blends

Application Instructions

Must be applied with a heat press 

• Prepress the garment to remove moisture and flatten the fibers
• Temperature : (350°F)
• Time : 8 seconds
• Pressure : medium (too much pressure will creates a flat print)
• Transfer can be covered with a teflon or parchment paper to avoid garment scorching
• Peel hot, as soon as you open the heat press

Artwork

Upload your designs in the following requirements:

• Created at a 300 dpi resolution
• Transparent background
• Minimum line weight of 0.25″ is suggested. Bold design will look better.
• Minimum recommended empty space between two lines is 0.25″
• Make sure your designs are not pixelated. Bad input will result in a bad output. 
  
• Upload your designs in the exact colors as they should be printed
• Transfers are printed with Pantone Coated colours
• Accepted files: PNG only
  
• Printable area is 12″ x 16″

Disclaimer : In order to burn a proper screen to print transfers a minimum line weight of 2px is required. All submitted designs will be printed as is. We cannot guarantee a perfect print with lines less than 2px weight. Please verify your artwork. We are not responsible for any quality loss if the design does not meet the requirements.

Simple Pricing